Printable targets will be added in here as they become available. All targets will be in .PDF format and print on standard 8.5 x 11 paper. 2 sets of targets will be printed on each sheet; simply print it out, rip/cut it in half and you'll have yourself 2 targets.

The heavier the paper you print them on the better it is. I found some 65# paper at an office supply for about 7 bucks (250 sheets). Have fun!

Printing Instructions:

Save the file to your computer first.

After saving it and opening it, hit print (File > Print), make sure these settings show the following:

Page Scaling: None
Auto-Rotate and Center: Unchecked

1" Dots (total 15 per page) - 0.5" Center/1" Outer Ring

http://www.airgunone.com/forums/picture.php?albumid=33&pictureid=172 (http://www.airgunone.com/targets/AG1DOTS.pdf)

Squirrel Target (2 Squirrels Per Side - 4 Per Page)

http://www.airgunone.com/forums/picture.php?albumid=33&pictureid=173 (http://www.airgunone.com/targets/AG1SQUIRRELS.pdf)

1" Crosshairs (1" outer ring, 0.5" middle ring, 1/4" red bullseye - 5 per page)

http://www.airgunone.com/forums/picture.php?albumid=33&pictureid=200 (http://www.airgunone.com/targets/AG15CROSS.pdf)

Sight-In Target - 0.5" Grids

http://www.airgunone.com/forums/picture.php?albumid=33&pictureid=201 (http://www.airgunone.com/targets/AG1GRID.pdf)

If anyone has some ideas for targets let us know...

Thanks Jon I'll be using those as soon as i finish off these Gamos

This is a good place for targets. http://www.mytargets.com/

heres a few
http://www.targetz.com/index.htm

Thanks for the links.

Here are some targets that I have made for my own personal indoor and outdoor practice:

http://i646.photobucket.com/albums/uu182/speedturtle810/MarksmanTargetPractice.jpg

http://i646.photobucket.com/albums/uu182/speedturtle810/HALF-INCHBULLSTARGETAREA.jpg

http://i646.photobucket.com/albums/uu182/speedturtle810/FINAL4-TARGETSPRACTICEPAPER.jpg

I have tested and printed them using adobe photoshop CS3 and a Dell Printer and I can validate the accuracy of the diameters specified.

Hope this helps.

Speedturtle

Very nice! Thanks speedturtle. J

You're welcome JonnyReb. :)

HI Speedturtle
I like your etPractice.jpg, how can I copy just one of the targets, so I can make my own target sheet with the targets further apart.
Thank You

Silly me, I did not get your point. :doh: Sorry, SuperFitter. :D :cheers:

Here is the target you need SF. :thumb: :cheers:

I like to use this site myself, it has so many other site links for some fabulous targets !
Some small targets also, but how else are we gonna get to be better shooters !

http://www.angelfire.com/ma3/max357/targets.html

http://www.glockfaq.com/content.aspx?ckey=Glock_FAQ_Targets

Wild Bill :thumb:

I like to use this site myself, it has so many other site links for some fabulous targets !
Some small targets also, but how else are we gonna get to be better shooters !

http://www.angelfire.com/ma3/max357/targets.html

http://www.glockfaq.com/content.aspx?ckey=Glock_FAQ_Targets

Wild Bill :thumb:

Bill....Im NEVER useing those down loadable targets again...:(
I now just keep the cans for targets...:thumb:


Pete

Here is the target you need SF. :thumb: :cheers:

Thank you Speedturtle:rockon: